Skip to content

Four models, and no others

MEROM 5.9 V charger for Braun clippers

A replacement charger for four Braun clipper references, 100–240 V in and 5.9 V 600 mA out, with the listing stating explicitly that it is compatible only with the models named.

MEROM 5.9 volt replacement charging cable for Braun hair clippers

MEROM 5.9 V charger for Braun clippers

A replacement charger for four Braun clipper references, 100–240 V in and 5.9 V 600 mA out, with the listing stating explicitly that it is compatible only with the models named.

Input
100–240 V
Output
5.9 V, 600 mA
Compatible with
Braun HC5090, HC5050, HC5030, HC5010
Stated limit
Compatible only with the products listed above, per the seller
Amazon reference
B0B81XQ7MG (identical on 5 markets)
EAN
0768481995658
  • Both output figures published, and a compatibility list of exactly four references
  • The listing states in writing that it fits nothing beyond those four — a limit most sellers leave unstated
  • None of the four listed clippers is reviewed on this site, so nothing here links to it

Best for: A Braun HC5010, HC5030, HC5050 or HC5090, and nothing else.

Search Amazon for this model

Specifications

Input
100–240 V
Output
5.9 V, 600 mA
Compatible with
Braun HC5090, HC5050, HC5030, HC5010
Stated limit
Compatible only with the products listed above, per the seller
Amazon reference
B0B81XQ7MG (identical on 5 markets)
EAN
0768481995658

A 5.9 volt, 600 milliamp supply for four Braun clipper references: HC5090, HC5050, HC5030 and HC5010.

What makes the listing better than most in this family is the sentence stating the limit — that it is compatible only with the products listed. Third-party sellers usually leave that open, and the ambiguity is how people buy a supply that does not fit.

The contrast with the other charger on this site is the useful lesson. That one is 12 volts, for Braun shavers; this one is 5.9 volts, for Braun clippers. Same brand, two voltages, no interchange. The number printed on the tool in your hand is the only one that settles it.

What people ask about this

Both are Braun chargers — can I use either?

No. The shaver supply on this site is 12 V; this one is 5.9 V. Same brand, different devices, and a supply of the wrong voltage is a failure rather than a slow charge. The figure printed on your own tool is the only one that decides.

Why review a charger that fits none of your clippers?

Because the family exists and the honest thing is to show what is in it. This one is here for the four Braun references it names, and this page states plainly that none of them is reviewed on this site.

More charging & power

  • BENSN 12 volt replacement charging cable for Braun shavers

    BENSN 12 V replacement charger

    A replacement charger for Braun shavers, 100–240 V in and 12 V 0.4 A out, with around thirty compatible Braun references listed by number — the older Series 3 3040S among them. The seller states it is not an original Braun part.

    Input
    100–240 V, 50–60 Hz
    Output
    12 V, 0.4 A
    Compatible with
    190, 190S, 340S, 3020S, 3000S, 3080S, 3040S, 370, 370CC, 390CC, 5190CC, 7865CC, 760CC, 790CC, 9290CC and around fifteen more, per the seller
    Origin
    Not an original Braun product, stated by the seller
    Amazon reference
    B07KR4SSKQ (identical on 6 markets)
    EAN
    0725756302696
    • The output voltage and current are both published — the two figures that decide whether a charger is safe for the device
    • Around thirty compatible references listed by number, including the 3040S, which is not the Series 3+ 3040si reviewed on this site: the list does not name it
    • A third-party power supply on a device whose original is still sold

    Best for: A Braun shaver whose original charger has been lost, where the model number is on the list.

    Check price on Amazon

Elsewhere in the bathroom cabinet

  • Panasonic Pro X Taper Blade 2.0 replacement clipper blade

    Panasonic Pro X taper blade 2.0

    The replacement blade for Panasonic's professional clippers, sharpened at 45 degrees with a diamond-like carbon coating, and listed as compatible with fifteen references including the ER-DGP84.

    Blade
    X-Taper Blade 2.0, stated to pick up hair as close as possible
    Edge
    Sharpened at 45°
    Coating
    DLC, diamond-like carbon
    Compatible with
    ER-DGP84, DGP82, DGP74, DGP72, FGP84, FGP82, FGP74, FGP72, GP84, GP81, GP80, HGP84, HGP82, HGP74, HGP72
    Amazon reference
    DE B07NSQYTM5 · US B07NSQYTM5 · GB B07KNVZ1QS · FR B07KNVZ1QS · IT B07KNVZ1QS · ES B07KNVZ1QS
    EAN
    5025232885060
    • Panasonic publishes the full compatibility list — fifteen references, by number
    • It fits the ER-DGP84 reviewed on this site, so a professional clipper can be renewed rather than replaced
    • Amazon carries this blade under two different references — one for Germany and the US, another for the UK, France, Italy and Spain

    Best for: Bringing a professional Panasonic clipper back to a new cutting edge.

    ≈ $70
    Check price on Amazon
  • Panasonic WER9930Y fading blade for professional clippers

    Panasonic WER9930Y

    A fading blade for the Panasonic ER-DGP86. The listing states one compatible machine and nothing else — which, on a clipper blade, is the whole specification.

    Type
    Fading blade
    Stated compatibility
    ER-DGP86
    Other specifications
    Not published on this listing
    Amazon reference
    B0C14N9T1Y (identical on 6 markets)
    EAN
    5025232922390
    • The compatible machine is named unambiguously, which is more than most blade listings manage
    • On sale on five markets
    • The listing carries a single line of description and no other specification: no edge angle, no coating, no dimensions

    Best for: An ER-DGP86, and nothing else.

    Check price on Amazon
  • Philips SH30/50 replacement shaver heads, set of three

    Philips SH30/50

    Three replacement heads with ComfortCut blades, for Philips shavers in the Series 1000, 3000 and S54XX ranges. The shaver's own reminder icon lights when they are due, and the change takes five steps.

    Contents
    Three replacement heads
    Blades
    ComfortCut
    Compatible with
    All Series 1000, 3000 and S54XX shavers (S1XXX, S3XXX, S54XX), plus the SW3700
    Reminder
    The shaver's built-in icon lights when the heads need changing
    Change procedure
    Five steps, per Philips
    Amazon reference
    B01B1742HM (identical on 6 markets)
    EAN
    8710103767091
    • Philips states the compatibility as a code pattern — S1XXX, S3XXX, S54XX — which you can check against your own shaver in one glance
    • Three heads in the box, which is a full set rather than a single replacement
    • The listing repeats one of its own bullet points twice

    Best for: A Philips Series 1000, 3000 or S54XX whose reminder icon has come on.

    ≈ $29
    Check price on Amazon

All charging & power